Logo
 Home | Contact Us
Login / Register | My Cart (Your Shopping Cart is Empty)  
Categories
*** 12 Volt Fully Electric Heaters ***
***12 Volt Fully Electric Compressors & Accessories***
**NEW** Air-O-Crimp Fittings (Easy to use DYI Crimping)
A/C Kit Packages
Speedy Specials
Vintage Air Products
Cars For Sale
Compressor Clutches & Bearings
Compressor Oil
Compressors
Compressor & Alternator Brackets
Condensers
Evaporators & Under Dash Units
Eyeball Vents & Louvers
Fittings / Adaptors / Firewall Bulkhead
Flexible Duct
Heater Cores & Heater De-misters
Heater Taps
Hose & Pipework
Orings / Sealing Washers / Gaskets / Seals
Pressure Switches
Radiators
Receiver Driers
Thermo Fans / Electric Fans
Thermostats Air Conditioning
TX Valves
UV Air Conditioning Dye
Alternators & Regulators
Starter Motors & Parts
Vehicle Lighting
Relays / Switches / Brake Lamp Switch
Solenoids
My Cart
Your Shopping Cart is Empty
Signup for our newsletter
Email Address :
Click here to unsubscribe
16mm Push Button Latching RED LED Button Switch 12v (Comes With Plug)
Click over image to enlarge

16mm Push Button Latching RED LED Button Switch 12v (Comes With Plug)

Price: $11.00
Product ID: SWLEDRED16
Weight: 0.20 kg
Order
Quantity:
| Add To Wish List
Description

These chrome-plated metal buttons are rugged and waterproof, simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep any water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a RED plastic LED ring. On the back there are 3 contacts for the button (common, normally-open and normally-closed) and 2 for the RED LED ring (+ and -). Connect 12V to the LED. 

This button is a Latching push button, when you press it the 'normally-open' contact shorts to the common contact. When you release it, the contacts open up again.

The switch and LED are separated, so you could wire it to turn on when pressed or vice versa.

Technical Details

  • Drill hole diameter: 16mm
  • Switch rating: 3A / 250VDC
  • Switch contacts: 1 NO, 1 NC
  • Material: Chrome plated brass
  • Grade: IP40/IP67
  • Contact resistance: < 50 mohm
  • Insulation resistance: > 1000 Mohm
  • Temperature: -20 C to +55 C
  • Mechanical life: > 500,000
  • Electrical life: > 50,000
  • Panel thickness: 1-13mm
  • Operating pressure: 1.5 - 2.5 N
  • Operating stroke: 2mm
  • Lamp rated voltage: 12V


Basic N/O Switching wiring guide

RED = LED Positive
BLACK = LED Negative
GREEN = 12V positive input
BLUE = 12V Output when button has been depressed (Can be linked with RED to allow LED to illuminate when button has been pushed in).

Home | Site Map | About Us | Terms and Conditions | Contact Us | How to Enable Cookies
 
  Website by Magicdust