12V DC Electric Compressor R134a

This compressor can be mounted just about anywhere in your vehicle as there is no need for a belt or mechanical drive!

You can mount these compressors in an engine bay, a boot / trunk, under a tray of a ute / pickup or truck!

You will need a decent alternator with an output of at least 140A and up (depending on what you are already running electrically, as you will need to take this into account), to manage the 35A@2000rpm to 80Amp@5000rpm rpm.

Compressor can run at 6000rpm but not recommended, manufacturer recommends 5000rpm MAX.

Comes with a set of Suction & Discharge pad to MIOR adaptors to allow the use of standard FOR screw on fittings.

Discharge is #8

Suction is #10

Controlling the compressor

Using the vehicles air conditioning thermostat located in the factory or aftermarket evaporator box, there are 3 speeds available.

Wiring diagram will be supplied either physically or by e-mail.

Wiring diagrams will only be given out if you have purchased the compressor from me and you can supply the name or invoice number pertaining to the purchase. NO EXCEPTIONS.

Powering the compressor

You will require the following items (We can supply these, please see our store or just ask us).

1. 100A Midi fuse with holder

2. 8 B&S Cable per metre depending on where you mount the compressor

3. Mini relay

Overall approx compressor dimensions

Width 123mm

Length 187mm

Height 155mm

VERY IMPORTANT *COMPRESSOR HAS TO BE MOUNTED AS IN PHOTOS WITH THE MOUNTING POINTS OT THE UNDERSIDE OF THE COMPRESSOR, THIS CAN NOT VARY OTHERWISE COMPRESSOR WILL SUSTAIN DAMAGE OR FAIL*